Service & Repairs

Ocean Quest has qualified and experienced service technicians on staff with over 30 years experience in servicing all types of equipment including regulators, buoyancy compensators, cylinder valves and manifolds, drysuit valves, drysuits, etc. We have a full time service technician that will ensure that you equipment gets the personal attention it deserves and that your equipment will be returned to you in a timely manner. All regulator services go through a custom Ocean Quest Check List and are checked over three times to ensure that your regulators are safely assembled, adjusted and perform as expected.

We can service almost any brand. If you don't see your regulator brand listed, we can likely service it!

Service Price
Regulator Service - Complete (1st, 2nd, and Octo)$160
Regulator Service - 1st Stage Only$65
Regulator Service - 2nd Stage Only$65
O2 Service Regulator - 1st and 2nd Stage$150
Air 2 Service (or similar style)$80
Regulator Inspection$55
BCD Service$60
BCD Inspection$40
Cylinder Visual Inspection - Visual Plus Add $10.00$35
Cylinder Hydrostatic Test (does not include fill)$75
O2 Service Cylinder (Includes Viz/Cylinder/Valve)$100
Cylinder Valve Service$50

*Note all pricing is for labour only. Service kits and parts are all additional.

Scuba_Cylinder_Safety_Notice(1150 x 300 px)

Drysuit Repairs

Ocean Quest is an authorized Whites Drywear / Aqualung Drysuit Repair Centre. Due to our experience and knowledge of Aqualung drysuits and drysuit repairs, Ocean Quest was specially selected to become an Authorized Aqualung Drysuit Repair Centre receiving special training from the Aqualung Drysuit Repair Department. This means we can complete many repairs in-house with a quick turnaround. If there are any repairs we cannot complete, we will give you an estimate of the repair cost and ship your suit to the Aqualung Repair Department for you.

We are also an authorized Bare Drysuit Dealer and can assist you with repairs and warranties with all Bare Drysuits.

We can also repair non-Whites / Aqualung / Bare drysuits as well. If you have a suit that needs repair, bring it to Ocean Quest and we can give you a quote and take care of your repair needs right away. We have over 30 years of equipment repair experience including drysuit repairs.

Repair Price
Aqualung/Whites Neck Seal Replacement$195
Aqualung/Whites Wrist Seal Replacement$195
Other Manufacturer Neck and Wrist ReplacementWill Quote
Basic Leak Test$60
Full Leak Test$125
Pee Valve Installation (Pee Valve not Included)$75
Other Repairs AvailableWill Quote

*Note all pricing is for labour only. Service kits and parts are all additional.

Air, Nitrox, Trimix and Specialty Fills

Ocean Quest fills Air, Enriched Air Nitrox and Trimix and is staffed by certified and experienced PADI Enriched Air and Trimix Gas Blenders.  Our air is tested every quarter and is rated as ultra clean, oxygen compatible Modified Grade E.

Our blending station consists of Partial Pressure Blending System, a Continuous Flow Blending System and Double Stage Oxygen Serviced Booster.

We understand the importance of a good fill.  Ocean Quest staff will ensure your tank leaves the shop full!

The following fills are available at Ocean Quest:

  • Air Fills
  • Nitrox Fills
  • Fills for Decompression Bottles up to 100% O2 (Boosted up to 3000 PSI)
  • Trimix Fills
  • Rebreather Cylinder Fills
  • SCBA, Paint Ball and BCA Avalanche Fills

Single fills, 10 and 20 fill cards are available for both air and nitrox (up to 40%) fills. Purchase Fill Cards Online!

Fill Type Price
Air Fill$16
10 Fill Air Card$140
20 Fill Air Card$270
Annual Air Card (2 Tanks - Personal Use)$720
Nitrox Fill$20
10 Fill Nitrox Card$180
20 Fill Nitrox Card$340
Annual Nitrox Card (2 Tanks - Personal Use)$990
Oxygen Per Cuft - - Always in Stock$1
Helium Per Cuft - Always in Stock$3.00
Booster Service (Fill plus Booster Service)$15
Medical Oxygen Cylinder Fill - Standard D$25
Medical Oxygen Cylinder Fill - Jumbo D / E$35
SCBA / Scott Air Pack$22
Pain Ball Cylinder Fill$22
BCA Avalanche Cylinder Fill$22

Book a Service or Repair

Name(Required)
MM slash DD slash YYYY